Installation

Should you not want to use your included stand and would like to hang from a tree, beam or posts please follow the below guide. To hang your Two Trees hammock you will require two fixed points, such as trees, beams, posts, or dyna bolts into brick walls.Consult a qualified builder if unsure.

Your Two Trees hammock will require a minimum of 3 metres between fixing points to get the ideal shape. Rope may be needed to attach one end of the hammock, it is recommended to use a double piece to avoid the hammock twisting. Hang the hammock loops at roughly the same height. When the hammock is in use it should sit 20-30cm above the ground.

For temporary installations such as trees or beams we recommend using the Two Trees hammock hanging kit (TT501HK).

1. Place the cord around the pole or tree, then thread through the figure eight hook.
2. Thread the cord through the clamp hook and secure at desired length.
3. Repeat process for other side of hammock. Ensure both hooks are secure.
4. Place hammock ends over hooks.

We recommend using the Two Trees screw eye and hook (TT502HH). Always check with your qualified builder if unsure for safety.

For sturdy masonary walls (not air, hollow, single brick, besser block, or free standing walls) a 10mm dyna bolt with large washer and rope can be used.